7-S4
MX5100, WSM
STEERING
3. TIGHTENING TORQUES
Tightening torques of screws, bolts and nuts on the table below are especially specified.
(For general use screws, bolts and nuts : See page G-10, G-11.)
W10127360
Item N·m kgf·m lbf·ft
Power steering main delivery hose joint bolt 49.0 to 58.8 5.0 to 6.0 36.2 to 43.4
PTO delivery pipe joint bolt 34.3 to 39.2 3.5 to 4.0 25.3 to 28.9
3-Points delivery pipe joint bolt 49.0 to 58.8 5.0 to 6.0 36.2 to 43.4
Regulator valve mounting screw 17.6 to 20.6 1.8 to 2.1 13.0 to 15.2
Hydraulic pump assembling mounting screw and nut 23.6 to 27.4 2.4 to 2.8 17.4 to 20.2
Hydraulic pump cover mounting bolt M10 39.2 to 44.1 4.0 to 4.5 28.9 to 32.5
Steering wheel mounting nut 48.0 to 55.9 4.9 to 5.7 35.4 to 41.2
Power steering main delivery hose retaining nut 46.6 to 50.9 4.8 to 5.2 34.4 to 37.6
Power steering turning delivery hoses retaining nut 24.5 to 29.4 2.5 to 3.0 18.1 to 21.7
Steering controller mounting nut 23.5 to 27.5 2.4 to 2.8 17.4 to 20.3
Power steering hose retaining nut 24.5 to 29.4 2.5 to 3.0 18.1 to 21.7
Tie-rod end nut 156.9 to 146.5 16.0 to 18.0 115.7 to 130.2
Tie-rod joint and steering cylinder 166.6 to 196.0 17.0 to 20.0 122.9 to 144.6
To Next Page
Loading...
