2NM/2NX/2NY/2NZ/2P0/2P6
1-3-71
U612 System Setting 3
Description
Makes settings for fax transmission regarding operation and automatic printing of the protocol list.
Method
1. Press the start key.
2. Select the item to be set.
Display Description
Auto Reduct Selects if auto reduction in the auxiliary direction is to be performed.
Protocol List Sets the automatic printing of the protocol list.
Selecting if auto reduction in the auxiliary direction is to be performed
Sets whether to receive a long document by automatically reducing it in the auxiliary direction or at
100% magnification.
1. Select the setting using the cursor right/left keys.
Display Description
On Auto reduction is performed if the received document is longer than the
fax paper.
Off Auto reduction is not performed.
* : Initial setting: On
2. Press the start key. The setting is set.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Select the setting using the cursor right/left keys.
Display Description
Err The protocol list is automatically printed out after communication only if a
communication error occurs.
On The protocol list is automatically printed out after communication.
Off The protocol list is not printed out automatically.
* : Initial setting: Off
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
Need help?
General
