2NM/2NX/2NY/2NZ/2P0/2P6
1-3-43
U251 Clr Mnt Cnt
Description
Displays and clears or changes the maintenance count.
Purpose
To verify the maintenance counter count.
Also to clear the count during maintenance service.
Setting
1. Press the start key.
2. Select the item to be changed.
3. Change the setting using the cursor right/left keys or numeric keys.
Display Description Setting range
M.Cnt A Count value for maintenance cycle A. 0 to 9999999
Clear A value is cleared. 0
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
