2NM/2NX/2NY/2NZ/2P0/2P6
1-3-70
U611 System Setting 2
Description
Sets the number of adjustment lines for automatic reduction.
Purpose
It carries out to set up the number of adjustment lines of automatic reduction.
Method
1. Press the start key.
2. Select the item to be set.
Display Description
ADJ LINES Sets the number of adjustment lines for automatic reduction.
ADJ LINES(A4) Sets the number of adjustment lines for automatic reduction when
A4 paper is set.
ADJ LINES(LT) Sets the number of adjustment lines for automatic reduction when
letter size paper is set.
Setting: ADJ LINES
Sets the number of adjustment lines for automatic reduction.
1. Change the setting using the cursor right/left keys or numeric keys.
Description Setting range Initial setting
Number of adjustment lines for automatic reduction 0 to 22 7
2. Press the start key. The value is set.
Setting: ADJ LINES(A4)
Sets the number of adjustment lines for automatic reduction when A4 paper is set.
1. Change the setting using the cursor right/left keys or numeric keys.
Description Setting range Initial setting
Number of adjustment lines for automatic reduction when A4
paper is set
0 to 22 22
2. Press the start key. The value is set.
Setting: ADJ LINES(LT)
Sets the number of adjustment lines for automatic reduction when letter size paper is set.
1. Change the setting using the cursor right/left keys or numeric keys.
Description Setting range Initial setting
Number of adjustment lines for automatic reduction when let-
ter size paper is set
0 to 22 22
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
