Kyocera ECOSYS M3040dn

2NM/2NX/2NY/2NZ/2P0/2P6
1-3-45
U253 Sel D/S Count
Description
Switches the count system for the total counter and other counters.
Purpose
Used to select, according to the preference of the user (copy service provider),
if folio size paper is to be counted as one sheet (single count) or two sheets (double count).
Setting
1. Press the start key.
2. Select the item to be set.
Display Description
SGL(All) Single count for all size paper.
DBL(Folio) Double count for Folio size or larger.
* : Initial setting: SGL(All)
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U260 Set Count Mode
Description
Changes the copy count timing for the total counter and other counters.
Purpose
To be set according to user request.
Setting
1. Press the start key.
2. Select the copy count timing.
Display Description
Feed When secondary paper feed starts.
Eject When the paper is ejected
* : Initial setting:
Eject
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.