2NM/2NX/2NY/2NZ/2P0/2P6-1
1-2-15
1. Enter the maintenance mode by entering 10871087 using the numeric keys.
2. Enter 000 using the numeric keys and press the start key.
3. Select Maintenance and press the start key to output a list of the current settings of the maintenance
items.
4. Press the stop key to exit.
1. Enter 927 using the numeric keys and press the start key.
2. Select [Excute].
3. Press the start key. The counter is cleared.
4. Press the stop key to exit.
1. Enter 600 using the numeric keys and press the start key.
2. Select [Country Code] and enter a destination code using the numeric keys.
(refer to the destination code list :P.1-3-63)
3. Press the start key. Data initialization starts.
4. Press the stop key to exit.
1.
Enter 001 using the numeric keys and press the start key. The machine exits the maintenance mode.
1. Place an original and make test copies.
Output an own-status report (maintenance item U000)
*: For servise setup only
Clearing the counter (maintenance item U927)
*: For servise setup only
Setting the country code (maintenance item U600) (with Fax model only)
Exit maintenance mode
*: For servise setup only
Completion of machine installation
*: For servise setup only
To Next Page
Loading...
Need help?
General
