Kyocera ECOSYS M3040dn Service Manual

2NM/2NX/2NY/2NZ/2P0/2P6
1-3-23
U025 Firm Update(S)
Description
Used to execute FW-Update from the USB flash device while Very High is selected in the Security
Level settings under the System Menu.
Purpose
Firmware upgrading is initiated by a service person to conduct U025 while a USB flash device is
inserted.
Method
1. Press the start key.
2. Press [Execute].
Display Description
(No. Action) *1 The item for malfunction prevention
Execute Executes the firmware-update.
*1: Basic model only
3. Press the start key.
* : This is not executable when a USB has not been installed.
4. After normal completion of operation, turn the main power switch off and on. Allow more than 5
seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.

Kyocera ECOSYS M3040dn Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Max Paper Size	A4
Scan Resolution	600 x 600 dpi
Output Capacity	250 sheets
Copy Resolution	600 x 600 dpi
Maximum Copy Size	A4
Operating Systems	Windows, Mac OS, Linux
Functions	Print, Copy, Scan
Print Speed	40 ppm
Scan Speed	40 ipm
Connectivity	USB 2.0, Ethernet
Warm-up Time	15 seconds
Memory	512 MB
Paper Size	A4, A5, A6, B5, Letter, Legal
Paper Weight	60-220 g/m²
Copy Speed	40 cpm
Scan Type	Color and Monochrome