2NM/2NX/2NY/2NZ/2P0/2P6
1-3-72
U620 FAX System
Description
Sets the signal detection method for remote switching. Be sure to change the setting according to
the type of telephone connected to the machine.
Purpose
The decision system of a remote change is set up to compensate for a user's telephone classifica-
tion, peculiarity.
Setting
1. Press the start key.
2. Select [Remort Mode] and press the start key.
Display Description
Remort Mode setting the mode
3. Select the item to be set.
Display Description
One One-shot detection
Cont Continuous detection
* : Initial setting: One
4. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
