2NM/2NX/2NY/2NZ/2P0/2P6
1-3-46
U265 Set Model Dest
Description
Sets the OEM purchaser code.
Purpose
Sets the code when replacing the main board and the like.
Setting
1. Press the start key.
2. Change the setting using the +- keys or numeric keys.
Display Description
No. Sets the OEM purchaser code.
3. Press the start key. The setting is set.
4. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
U285 Set Svc Sts Page
Description
Determines displaying the digital dot coverage report on reporting.
Purpose
According to user request, changes the setting.
Setting
1. Press the start key.
2. Select [On] or [Off].
Display Description
On Displays the digital dot coverage.
Off Not to display the digital dot coverage.
* : Initial setting: On
3. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
Need help?
General
