2NM/2NX/2NY/2NZ/2P0/2P6
1-3-7
(3) Contents of the maintenance mode items
U000 Mainte Report
Description
Outputs lists of the current settings of the maintenance items and paper jam and service call
occurrences. Outputs the event log. Also sends output data to the SD card.
Purpose
To check the current setting of the maintenance items, or paper jam or service call occurrences.
Before initializing or replacing the backup RAM, output a list of the current settings of the mainte-
nance items to reenter the settings after initialization or replacement.
Method
1. Press the start key.
2. Select the item to be output.
Display Output list
Maintenance Output the maintenance report.
User Status Output the user status report.
Service Status Output the service status report.
Event Output the event report.
NW Status Out put the network status report
All Output the All report.
3. Press the start key. A list is output.
* : When A4/Letter paper is available, a report of this size is output. If not, specify the paper
feed location.
Method: Send to the USB memory
1. Press the start key.
2. Insert USB memory in UBS memory slot.
3. Select the item to be send.
4. Select [USB(Text)] or [USB(HTML)].
5. Press the start key.
Output will be sent to the USB memory.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display Output list
Print A report is printed.
USB(Text) It outputs to USB memory in Text form.
USB(HTML) It outputs to USB memory in HTML form.
To Next Page
Loading...
Need help?
General
