Kyocera ECOSYS M3040dn

2NM/2NX/2NY/2NZ/2P0/2P6
1-3-20
U010 Set Mainte ID
Description
Sets the maintenance mode ID.
Purpose
Modify maintenance mode ID for more security.
Method
1. Press the start key.
2. Select [Change] or [Initialize].
Display Description
Change Changes the maintenance mode ID at the market.
Initialize Initializes the maintenance mode ID at the market.
Setting: Change
1. Select [New ID].
2. Enter a new 8-digit ID on ten keys (0 – 9, *, #). * and # are mandatory to contain.
3. Select [New ID(Reconfirm)].
4. Enter a new 8-digit ID on ten keys (0 – 9, *, #).
5. Select [Execute].
6. Press the start key. The setting is set.
Display Description
New ID Enter a new 8-digit ID
New ID(Reconfirm) Enter a new 8-digit ID (to confirm)
Execute Changes the maintenance mode ID
Method: Initialize
1. Select [Initialize].
2. Press the start key. ID is initialized.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.