2NM/2NX/2NY/2NZ/2P0/2P6
1-3-73
U625 Set Comm
Description
Makes settings for the auto redialing interval and the number of times of auto redialing.
Purpose
Change the setting to prevent the following problems:
fax transmission is not possible due to too short redial interval, or fax transmission takes too much
time to complete due to too long redial interval.
Method
1. Press the start key.
2. Select the item to be set.
Display Description
Interval Setting the auto redialing interval
Times Setting the number of times of auto redialing
Setting: interval
1. Change the setting using the cursor right/left keys.
Description Setting range Initial setting
Redialing interval 1 to 9 (min.) 3 (120 V)/
2 (220-240 V)
2. Press the start key. The value is set.
Setting: times
1. Change the setting using the cursor right/left keys or numeric keys.
Description Setting range Initial setting
Number of redialing 0 to 15 2 (120 V)/
3 (220-240 V)
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
To Next Page
Loading...
Need help?
General
