2NM/2NX/2NY/2NZ/2P0/2P6
1-5-66
10. Remove two screws.
11. Release the hooks by bending both-
side of the right middle cover and then
remove it by pulling and lifting up for-
ward.
Figure 1-5-111
12. Pull out the cassette.
13. Remove three screws.
14. Release two hooks by sliding the right
lower cover upward and then remove
the right lower cover.
Figure 1-5-112
Right middle cover
Screw
Hook
Screw
Right lower cover
Screw
Screw
Screw
Hooks
To Next Page
Loading...
