Kyocera ECOSYS M3040dn

2NM/2NX/2NY/2NZ/2P0/2P6
2-2-30
*1: 50/60 ppm model only
YC9 *1
1 LIFTMOTOR O 0/5 V DC LM: On/Off
Connected to
the lift motor
2 GND - - Ground
YC10
1 MMOTCW O 0/5 V DC MM drive shift signal
Connected to
the main
motor and
the durm
motor
2 MMOTRDYN I 0/3.3 V DC MM ready signal
3 MMOTCLKN O 0/5 V DC(pulse) MM clock signal
4 MMOTONN O 0/5 V DC MM: On/Off
5 GND - - Ground
6 +24V2_E1 O 24 V DC 24 V DC power output
7 *1 +24V2_E1 O 24 V DC 24 V DC power output
8 *1 GND - - Ground
9 *1 DMOTONN O 0/5 V DC DRM: On/Off
10 *1 DMOTCLKN O 0/5 V DC(pulse) DRM clock signal
11 *1 DMOTRDYN I 0/3.3 V DC DRM ready signal
12 *1 DMOTCW O 0/5 V DC DRM rotation direction
YC11
1 +24V2_E1 O 24 V DC 24 V DC power output
Connected to
the MP sole-
noid
2 MPFSOLN O 0/24 V DC MPSOL: On/Off
YC12
1 +24V2_E1 O 24 V DC 24 V DC power output
Connected to
the devel-
oper clutch,
feed clutch,
regist clutch,
mid clutch
and duplex
clutch
2 DLPCLN O 0/3.3 V DC DEVCL: On/Off
3 +24V2_E1 O 24 V DC 24 V DC power output
4 FEEDCLN O 0/24 V DC PFCL: On/Off
5 +24V2_E1 O 24 V DC 24 V DC power output
6 REGCLN O 0/24 V DC RCL: On/Off
7 *1 +24V2_E1 O 24 V DC 24 V DC power output
8 *1 MIDCLN O 0/24 V DC PCCL: On/Off
9 *1 +24V2_E1 O 24 V DC 24 V DC power output
10 *1 DUCLN O 0/24 V DC DUCL: On/Off
Connector Pin Signal I/O Voltage Description