10
10.10 Specifying Expert User Mode Functions
10-74
Utility Mode Operations Chapter 10
6 Press the [Start] key.
The automatic color
shift adjustment
procedure begins, and
the test pattern is
printed on 11 × 17-size
paper.
7 Check the distance
from the reference line
of the black lines to the
cyan lines in the test
pattern along the X and
Y directions.
❍ If there is no shift in
the reference line,
skip to step 14.
8 If the lines are shifted as shown
at the right, touch to
specify the desired negative
adjustment for “X” (between -1
dot and -6 dots).
Y
X
To Next Page
Loading...
