10
10.10 Specifying Expert User Mode Functions
10-88
Utility Mode Operations Chapter 10
10 If the fold position is shifted to the
left, touch to specify the
desired positive adjustment
(between +1 mm and +7 mm).
11 If the fold position is shifted to the
right, touch to specify the
desired negative adjustment
(between -1 mm and -7 mm).
12 Touch [Enter].
13 Touch [Exit] in the next three screens that appear.
The Basic screen appears again.
14 Use the “Booklet” and “Bind” settings to make another copy sample.
15 Check the print result.
❍ If more adjustment is necessary, return to step 1 and repeat the adjustment
procedure.
To Next Page
Loading...
