11.5 When the Message “Staple mode cannot be used.” Appears
11
11-55
Touch Panel Messages Chapter 11
✎
Reminder!
If the message “Staple mode cannot be used.” appears, be sure to perform
these steps.
If the paper is pulled out with too much force without performing these steps,
the finisher may be damaged.
7 Remove all paper fed into the
paper output tray.
8 Open the transport guide, and
then pull out any misfed paper in
the transport section.
✎
Reminder!
If the paper cannot easily be
pulled out, stop trying to pull it
out, and continue with to step
9.
Pulling out the paper with too
much force may damage the
folding unit.
To Next Page
Loading...
