iv
2.3 Turning the Machine On and Off............................................... 2-17
Turning On the Machine .......................................................... 2-17
When the Machine Is Turned On ............................................. 2-17
Queuing a Job During Warm-Up.............................................. 2-17
Panel Reset Timer ................................................................... 2-17
Power Save Mode.................................................................... 2-18
Recovering From Power Save Mode ....................................... 2-19
Sleep Mode.............................................................................. 2-19
Recovering From Sleep Mode ................................................. 2-19
Turning Off the Machine .......................................................... 2-20
When the Machine Is Turned Off ............................................. 2-20
2.4 Using the Touch Panel............................................................... 2-21
Description of the Touch Panel................................................ 2-21
Default Settings........................................................................ 2-21
2.5 Adjusting the Angle of the Control Panel ................................ 2-23
To adjust the angle of the control panel................................... 2-24
2.6 Loading Paper Into the 1st Drawer ........................................... 2-26
2.7 Loading Paper Into the 2nd, 3rd or 4th Drawer ....................... 2-31
2.8 Loading Paper Into the Large-Capacity Paper Feed
Cabinet ........................................................................................ 2-33
2.9 Loading Paper Into the Bypass Tray ........................................ 2-35
2.10 Feeding the Document............................................................... 2-41
Loading the Document Into the Reverse Automatic
Document Feeder .................................................................... 2-41
Placing the Document On the Original Glass .......................... 2-44
3 Basic Copy Operations
3.1 Specifying the Number of Copies ............................................... 3-2
To specify the number of copies ................................................ 3-2
To change the setting for the number of copies......................... 3-3
3.2 Stopping Copying......................................................................... 3-4
3.3 Selecting a Color Setting............................................................. 3-5
Auto Color .................................................................................. 3-5
Full Color.................................................................................... 3-5
2 Color ....................................................................................... 3-5
Single Color ............................................................................... 3-5
Black .......................................................................................... 3-5
To select the Color setting ......................................................... 3-6
To Next Page
Loading...
Need help?
General
