158 User Manual QuickTOC
®
purity
ATEX 2 04E3920
9 Accessories and Options
9.3 Multi Parameter Option LAR | PROCESS ANALYSERS AG
9.3 Multi Parameter Option
The analyser may measure multiple parameters with single sample streams. This can be factory-set or
be upgraded later.
The analyser can be fitted with up to four detectors for this option. The parameters can also be set for
every sample stream and channel.
The parameters can be measured are:
• TOG = Total Organic Carbon
• TIC = Total Inorganic Carbon
• TC = Total Carbon (TOG + TIC)
• COD = Chemical Oxygen Demand
• TN
b
= Total Nitrogen bound
Notice
Please contact the Sales Department of LAR if you are interested in upgrading to this
option (Chapter 15 on page 183).
i
To Next Page
Loading...