LAR Process Analysers QuickTOC purity - Provide Acid Solution (TOC-Direct and TOC-Difference Method)

58 User Manual QuickTOC
®
purity
ATEX 2 04E3920
4 Installation
4.9 Provide Acid Solution (TOC-Direct and TOC-Difference Method) LAR | PROCESS ANALYSERS AG
See Chapter 6.1.2 on page 55.
4.9 Provide Acid Solution (TOC-Direct and TOC-Difference Method)
For the usage of the analyser with the TOC-Direct or TOC-Difference Method, an acid solution for strip-
ping out inorganic carbon compounds (TIC) must be provided. See Chapter 6.1.3 on page 56 for the
TOC-Difference Method or the Chapter 6.1.4 on page 56 for the TOC-Direct Method.
Notice
For the start-up, please use an acid solution which is not older than five days.
It is best to keep canisters in the Reagent Cabinet (see Chapter 9 from
page 169).
i