LAR Process Analysers QuickTOC purity - Care Protocol (Analyser)

178 User Manual QuickTOC
®
purity
ATEX 2 04E3920
13 Logs and Protocols
13.3 Care Protocol (Analyser) LAR | PROCESS ANALYSERS AG
13.3 Care Protocol (Analyser)
Interval Measure
Task
completed
Notes
1 week Clean vessel for calibration fluid
and replace calibration standard

Check pump tubes and clean if
necessary

Check inlet and outlet of the con-
trol unit for impurities

Check ventilator for impurities 
3 months Check reactor pipe end and clean
if necessary

Inspection of the gas cooling
pipes

Check pump cassettes and clean
if necessary

Check the rollers of the pump
head for ease of movement

Checking the measured values
with standard solution

Perform a calibration 
Check and document analyser
status

Perform a measurement and
check the values

if neces-
sary
Check viton tubes and replace if
necessary

Date: Signature: