88 User Manual QuickTOC
®
purity
ATEX 2 04E3920
7 How to Work With the Analyser
LAR | PROCESS ANALYSERS AG
After a self-test of the device, the login screen is displayed.
Enter your login details here to log in. To get to user level I for the first time, press the button at the bottom
right (1) without entering the password.
By default, the default password is 'lar'. Leave the input field "Operator Log" empty, to reach the Level II
Fig. 51: Login
The opening screen with device number and software version is displayed.
Fig. 52: Opening screen
When the analyser is first switched on, the device starts in offline mode. After switching off or after a
power failure, the device starts and automatically and enters the last active mode (online or stand-by).
1
2
To Next Page
Loading...