LDI DIGISONDE 4D - Error;Event ID and Auxiliary Information

LDI Intellectual Property.
Not for secondary distribution or replication, in part or entirety.
DIGISONDE-4D
SYSTEM MANUAL
VERSION 1.2.11
5-52 SECTION 5 - SYSTEM SOFTWARE – ANNEX A
TELEMETRY PACKET SUMMARY
Table 5A- 39: Telemetry Packet Summary
Packet ID
Packet Mnemonic
Packet Title
0x81
SCI_DATA
Science Data
0x01
HK_ALIVE
I Am Alive
0x02
HK_EVENT
Event Message
0x03
HK_ERROR
Error Message
0x04
HK_CNTDOWN
PROGSCHD Countdown
0x05
HK_BIT
Hardware Sensors Report
ERROR/EVENT ID AND AUXILIARY INFORMATION
Table 5A- 40: Error Message ID and Auxiliary Information
Error ID
Message Text
Item
Count
Information
0001h
Command stream out of sync, skipped %d bytes to next sync
pattern
1
Number of skipped bytes until next
sync pattern
0002h
Bad checksum in packet 0x%02X
1
Command ID
0003h
Command packet is %d byte long, too large for packet pool
1
Byte Count
0004h
Unknown Command 0x%02X
1
Command ID
0005h
Wrong packet length of %d bytes for command 0x%02X
2
Command ID
Byte Count
0006h
Not in Standby state for upload command 0x%02X to pro-
ceed
1
Command ID
0007h
Upload packet 0x%02X with grouping flag 0x%02X and
sequence count %d is out of sequence
3
Command ID
Grouping Flag
Sequence Count
0008h
Incomplete upload sequence of %d packets is discarded
1
# of accepted packets
0009h
Upload data not available to execute command 0x%02X
1
Command ID
000Ah
System in Standby state, cannot run command 0x%02X
1
Command ID
000Bh
System in Standby state, cannot start schedule %d at SST
%4d.%02d.%02d %02d:%02d:%d.03%d
8
Schedule #
Year
Month
Day
Hour
Minute
Second
Millisecond
000Ch
Command 0x%02X: bad EEPROM bank number %d
2
CommandID
Bank #
000Eh
Cannot execute command 0x%02X, command queue is full
1
CommandID