LDI DIGISONDE 4D - Command List Summary

LDI Intellectual Property.
Not for secondary distribution or replication, in part or entirety.
DIGISONDE-4D
SYSTEM MANUAL
VERSION 1.2.11
SECTION 5 - SYSTEM SOFTWARE – ANNEX B 5-59
5:140. Current Amplifier has seven switch frequencies. Typical example from StationSpecific.UDD:
*936 < 1690 2450 4100 5550 10950 16150 22100 >
COMMAND LIST SUMMARY
Table 5B- 12: COMMAND LIST SUMMARY
Command ID
Command Mnemonic
Command Title
0x70
PM
Periodic Message
0x71
PROG_UPLOAD
Upload program definition
0x72
PROG_START
Start program
0x73
STOP
Stop currently running program
0x74
SCHD_UPLOAD
Upload schedule definition
0x75
SCHD_START
Start schedule
0x76
SST_UPLOAD
Upload new SST
0x32
SST_FLUSH
Flush SST table
0x77
RFIL_UPLOAD
Upload new RFIL table
0x78
RFIL_FLUSH
Clear RFIL table
0x79
SYS_REBOOT
Reboot control computer
0x81
STATE_STANDBY
Switch to standby state
0x82
STATE_DIAG
Switch to diagnostics state
0x84
STATE_OPER
Switch to scheduled operations state