LDI Intellectual Property.
Not for secondary distribution or replication, in part or entirety.
DIGISONDE-4D
SYSTEM MANUAL
VERSION 1.2.11
5-56 SECTION 5 - SYSTEM SOFTWARE – ANNEX B
Start program packet TYPE=0x72, Length = 1
5:125. The packet is used to start program. DESC should stop current program and start new program imme-
diately.
Table 5B- 3: Start program packet TYPE=0x72, Length = 1
Stop currently running program packet TYPE=0x73, Length = 0.
5:126. The packet is used to stop any currently running program.
Load schedule packet TYPE=0x74, Length is variable
5:127. The packet is used to load schedule to the schedule structure (Table 3-3)
Table 5B- 4: Load schedule packet TYPE=0x74, Length is variable
Start schedule packet TYPE=0x75, Length = 1
5:128. The packet is used to start schedule. DESC should stop current schedule and current program and start
new schedule immediately.
Table 5B- 5: Start schedule packet TYPE=0x75, Length = 1
Load Start Schedule Time (SST) packet TYPE=0x76, Length = 18
5:129. The packet is used to start schedule at certain time. At that time DESC should stop current schedule and
current program and start new schedule.
Table 5B- 6: Load Start Schedule Time (SST) packet TYPE=0x76, Length = 18
Time stamp (Table 5A- 13)
Flush Start Schedule Time (SST) Queue packet TYPE=0x32, Length = 0
5:130. The packet is used as a request to flush SST queue in DESC memory.
To Next Page
Loading...