Lexmark MS81x - Printed Page Count; Permanent Page Count (Perm; Processor ID

This setting is used by the printer to determine whether US or non-US factory default values should be used. The
following printer settings have different US and non-US values:
Printer default values US value Non-US value
Paper Sizes setting in the General Settings menu U.S. Metric
Default Paper Size (paper feeding sources which do not
have hardware size sensing capabilities)
Letter A4
Default Envelope Size (envelope feeding sources which do
not have hardware size sensing capability)
10 Envelope DL Envelope
Fax media size Letter A4
PCL Symbol Set PC-8 PC-850
PPDS Code Page 437 850
Universal Units of Measure Inches Millimeters
To change this setting:
1 From the Diagnostics menu, navigate to:
Printer Setup > Defaults
2 Choose U.S. or Non‑U.S.
3 Do one of the following:
• Depending on the printer model, press OK or touch to save any changes.
• Press X to return to the Printer setup menu.
Printed Page Count
The value of this setting gauges the amount of usage on the printer. The value of the Printed Page Count setting will
equal the values of the Picked Sides meter. After all print tests have been completed, the value will reset to zero.
To view the page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Printed Page Count.
Note: The value of the setting cannot be changed manually.
Permanent Page Count (Perm page count)
The value of this setting indicates the total amount of pages that have been printed. After all print tests have been
completed, the value will reset to zero.
To view the permanent page count:
From the Diagnostics menu, navigate to PRINTER SETUP > Perm Page Count.
Note: The Permanent Page Count value cannot be reset.
Processor ID
The value of this setting indicates the ID of the processor on the controller card within the printer.
To view the Processor ID:
4063
Service menus
237