5 Remove the two screws (B), then remove the left tamper motor.
Tamper drive belt removal
1 Remove the left cover. See “Stapler left cover removal” on page 480.
2 Remove the right cover. See “Stapler right cover removal” on page 474.
3 Remove the top cover. See “Stapler top cover removal” on page 482.
4 Remove the tamper motor assembly engaged to the belt. See “Tamper motor (right) removal” on page 491 or
“Tamper motor (left) removal” on page 491.
4063
Repair information
492
To Next Page
Loading...
