• “Output bin sensor cover removal” on page 326
• “Right frame pivot removal” on page 327
• “Sensor (rear door interlock) removal” on page 328
Duplex motor removal
1 Remove the paper tray from the machine.
2 Remove the rear door. See “Rear door removal” on page 285.
3 Remove the rear lower cover. See “Rear lower cover removal” on page 280.
4 Remove the fuser access door. See “Fuser access door removal” on page 324.
5 Remove the three screws (A) securing the duplex motor to the machine.
4063
Repair information
320
To Next Page
Loading...
