Paper type Paper weight 4‑bin mailbox Offset stacker Staple finisher Staple, hole punch
finisher
Rough/cotton
60–90 g/m
2
(16–24 lb)
Custom type [x]
60–90 g/m
2
(16–24 lb)
*
The finisher stacks the paper but does not staple or punch holes in it.
Output options theory
• “Output expander theory” on page 624
• “High capacity output expander theory” on page 625
• “Mailbox theory” on page 626
• “Staple finisher theory” on page 627
Output expander theory
The output expander enables the user to have additional output capacity. If the standard output bin of a printer is
already full while printing, the media can be sent to the output expander. The output expander uses drive motors and
a series of sensors to determine the media's location and position in the paper path.
Output expander paper path
output bin
sensor(bin full)
diverter
interface/main motor
diverter motor
sensor (pass through)
transport rollers
diverter plunger
exit roller
4063
Appendix C: Theory of operation
624
To Next Page
Loading...
