Sensor (HCOE media bin full) with flag removal
1 Remove the sensor cover. See “HCOE sensor cover removal” on page 462.
2 Remove the two screws (A) securing the sensor brace.
3 Disconnect the cable (B), and remove the sensor (media bin full) with flag.
HCOE right outer cover removal
1 Open the rear door, then detach the string (A) from the rear door.
Note: Fasten the string to the rear side to prevent it from recoiling into the interior of the HCOE.
4063
Repair information
463
To Next Page
Loading...
