4 Gently flex the right bracket and release the tab on the MPF support link, as shown in the following image.
5 Slide the front door to the left, and detach it from the machine.
Inner guide deflector removal
1 Remove the left cover. See “Left cover removal” on page 277.
2 Remove the controller board access shield. See “Controller board access shield removal” on page 351.
3 Remove the media tray. See “Media tray removal” on page 339.
4 Remove the MPF tray. See “MPF tray removal” on page 308.
5 Remove the front door. See “Front door removal” on page 288.
6 Remove the toner cartridge.
7 Remove the imaging unit.
8 Remove the MPF feeder lift plate. See “MPF feeder lift plate removal” on page 302.
9 Remove the media turn guide. See “Media turn guide removal” on page 299.
10 Remove the media vertical guide. See “Media vertical guide removal” on page 300.
11 Remove the duplex exit diverter. See “Duplex exit diverter removal” on page 286.
12 Gently press the mounting loops inward to free them from the bosses on the frame.
4063
Repair information
289
To Next Page
Loading...
