6 Disconnect the cable (B).
Standard bin cover removal
1 Remove the left cover. See “Left cover removal” on page 277.
2 Remove the right cover. See “Right cover removal” on page 283.
3 Open the rear door.
4 Remove the top cover. See “Top cover removal” on page 282.
5 Remove the upper redrive. See “Upper redrive removal” on page 331.
6 Remove the output bin sensor cover. See “Output bin sensor cover removal” on page 326.
7 Remove the sensor (standard bin full) with actuator. See “Sensor (standard bin full) removal” on page 329.
8 Remove the four screws (A).
4063
Repair information
330
To Next Page
Loading...
