Lexmark MS81x - Control Panel Removals; 4.3-Inch Tilting Display Removal

Installation notes:
• When replacing the LVPS, ensure that all connections are replaced.
• When replacing the LVPS, ensure that the connector pins (D) properly engage the controller board.
Control panel removals
• “4.3‑inch tilting display removal” on page 369
• “7‑inch tilting display removal” on page 372
• “Control panel removal (2.4‑inch screen)” on page 375
• “Control panel removal (4.3‑inch screen, 7‑inch screen)” on page 381
• “Control panel board (2.4‑inch tilting display) removal” on page 387
• “Control panel board (4.3‑inch tilting display) removal” on page 390
• “Control panel board (7‑inch tilting display) removal (MS812de)” on page 393
• “Control panel front cover removal” on page 396
• “Control panel latch removal” on page 398
• “Control panel left bezel removal” on page 399
• “Left control panel hinge removal” on page 400
• “Right control panel hinge removal” on page 403
4.3‑inch tilting display removal
1 Remove the control panel left bezel. See “Control panel left bezel removal” on page 399.
2 Remove the control panel. See “Control panel removal (4.3‑inch screen, 7‑inch screen)” on page 381.
3 Remove the control panel latch. See “Control panel latch removal” on page 398.
4 Remove the control panel front cover. See “Control panel front cover removal” on page 396.
4063
Repair information
369