Lexmark MS81x - Base Printer - Bottom Removals; Duplex Removal

5 Move the upper redrive down and away from the machine to remove it.
Base printer - bottom removals
• “Duplex removal” on page 333
• “Duplex front flap removal” on page 335
• “Duplex rear flap removal” on page 336
• “Left frame extension removal” on page 337
• “Media tray removal” on page 339
• “Media size actuator removal” on page 340
• “Pick roller assembly removal” on page 342
• “Right frame extension” on page 343
• “Sensor (duplex path) removal” on page 344
• “Sensor (tray 1 media out) removal” on page 345
• “Separator roller assembly removal” on page 347
Duplex removal
1 Remove the top cover. See “Top cover removal” on page 282.
2 Remove the left cover. See “Left cover removal” on page 277.
3 Remove the rear door. See “Rear door removal” on page 285.
4 Remove the rear lower cover. See “Rear lower cover removal” on page 280.
5 Remove the PCBA housing. See “PCBA housing removal” on page 357.
6 Remove the fuser access door. See “Fuser access door removal” on page 324.
7 Remove the duplex motor. See “Duplex motor removal” on page 320.
4063
Repair information
333