Parts catalog
• “Legend” on page 540
• “Assembly 1: Covers” on page 543
• “Assembly 2: Paper path” on page 545
• “Assembly 3: Fusers” on page 547
• “Assembly 4: Electronics” on page 549
• “Assembly 5: Drive motors” on page 553
• “Assembly 6: Duplex” on page 555
• “Assembly 7: Frame” on page 557
• “Assembly 8: Control panel” on page 559
• “Assembly 9: Paper tray” on page 563
• “Assembly 10: Input options” on page 565
• “Assembly 11: 250-sheet tray option” on page 567
• “Assembly 12: 550-sheet tray option” on page 569
• “Assembly 13: High capacity input tray option 1” on page 571
• “Assembly 14: High capacity input tray option 2” on page 573
• “Assembly 15: Output options” on page 575
• “Assembly 16: Output expander option” on page 577
• “Assembly 17: High capacity output expander option” on page 579
• “Assembly 18: Staple finisher option 1” on page 581
• “Assembly 19: Staple finisher option 2” on page 583
• “Assembly 20: Mailbox option 1” on page 585
• “Assembly 21: Mailbox option 2” on page 587
• “Assembly 22: Miscellaneous” on page 589
• “Assembly 23: Power cords” on page 593
Legend
The following column headings are used in the parts catalog:
• Asm‑index—Identifies the assembly and the item in the diagram. For example, 3‑1 indicates Assembly 3 and item
1 in the table.
• Part number—Identifies the unique number that correlates with the part.
• Units/mach—Refers to the number of units actually used in the base machine or product.
• Units/option—Refers to the number of units in a particular option.
• Units/FRU—Refers to the number of units in a particular FRU.
• Description—A brief description of the part.
4063
Parts catalog
540
To Next Page
Loading...
