3 Remove the separator roller assembly.
Base printer - left removals
• “Controller board removal” on page 349
• “Controller board access cover removal” on page 350
• “Controller board access shield removal” on page 351
• “Fuser drive motor removal” on page 351
• “Main cooling fan removal” on page 353
• “Main drive motor removal” on page 354
• “Media feeder removal” on page 356
• “PCBA housing removal” on page 357
• “Sensor (control panel interlock) removal” on page 359
• “Sensor (pick roller position) removal” on page 360
• “Toner add motor removal” on page 361
4063
Repair information
348
To Next Page
Loading...
