To clear the event log:
1 From the Diagnostics menu, navigate to:
Event Log > Clear Log
2 Choose any of the following:
• Yes—To clear the Event log
• No—To exit the Clear log menu
Exit Diags
Select this option to exit the Diagnostics menu. The printer performs a POR and restarts in normal mode.
This menu appears as a soft button at the bottom right corner of the panel. This is always accessible to the user from
the main Diagnostics menu.
Configuration menu
• “Entering configuration mode” on page 243
• “Roller Kit Counter Value” on page 243
• “Reset Roller Kit Counter” on page 243
• “Print Quality Pages” on page 244
• “Reports” on page 244
• “Size sensing” on page 244
• “Panel Menus” on page 245
• “PPDS Emulation” on page 245
• “Download Emuls” on page 245
• “Safe Mode” on page 245
• “Factory Defaults” on page 246
• “Energy Conserve” on page 246
• “Paper Prompts” on page 246
• “Envelope Prompts” on page 247
• “Action for Prompts” on page 247
• “Jobs on Disk” on page 248
• “Disk Encryption” on page 248
• “Erase All Information on Disk” on page 248
• “Wipe All Settings” on page 249
• “Font Sharpening” on page 249
• “Require Standby” on page 249
• “A5 Loading” on page 249
• “UI Automation” on page 250
• “LES Applications” on page 250
• “Key Repeat Initial Delay” on page 250
4063
Service menus
242
To Next Page
Loading...
