3 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
4 Insert the tray.
5 To clear the message and continue printing, select Next > > Clear the jam, press OK > .
24x paper jams
Error code Description Action
241.02 Sensor (input) early arriving jam See “Sensor (input) early arriving jam service check” on page
54.
241.06 The media is late reaching the sensor (input)
within the specified time from tray 1
See “Sensor (input) never‑ or late‑arriving jam service check”
on page 56.
241.10 The media is late reaching the sensor (input)
within the specified time from tray 1
See “Sensor (input) never‑ or late‑arriving jam service check”
on page 56.
241.13 The media is late reaching the sensor (input)
within the specified time from tray 1
See “Sensor (input) never‑ or late‑arriving jam service check”
on page 56.
241.14 The media is late reaching the sensor (input)
within the specified time from tray 1
See “Sensor (input) never‑ or late‑arriving jam service check”
on page 56.
241.15 Media tray 1, tray pulled jam See “Media tray 1, tray pulled jam” on page 82.
241.20 Took too long to ramp up media feeder motor
in tray 1
See “Media feeder motor control service check” on page 81.
241.21 Media feeder motor stall in tray 1 See “Media feeder motor control service check” on page 81.
241.22 Media feeder motor pick motor under‑speed
in tray 1
See “Media feeder motor control service check” on page 81.
4063
Diagnostic information
80
To Next Page
Loading...
