2 Flex the sheets back and forth to loosen them, and then fan them. Do not fold or crease the paper. Straighten the
edges on a level surface.
3 Reload paper into the multipurpose feeder.
4 Slide the paper guide until it lightly rests against the edge of the paper.
5 To clear the message and continue printing, select Next > > Clear the jam, press OK > .
250 paper jams
Error code Description Action
250.02 The input sensor detected a late feed during
a pick retry from the MPF media tray
See “Sensor (input) early arriving jam service check” on page
54.
250.06 The media is late reaching the sensor (input)
within the specified time from the MPF media
tray
See “Sensor (input) never-arriving jam from MPF media tray
service check” on page 86.
4063
Diagnostic information
85
To Next Page
Loading...
