Lexmark XC4150 - Page 189

161 and 162 error messages
Error code Description Action
161.80 The motor (tray 1 pick) did not turn on. See
“Tray pick roller assembly and lift motor
service check” on page 211.
161.81 The motor (tray 1 pick) did not turn o.
161.82 The motor (tray 1 pick) speed did not ramp up to
the required level.
161.83 The motor (tray 1 pick) stalled.
161.84 The motor (tray 1 pick) ran too slow.
161.85 The motor (tray 1 pick) ran too fast.
161.86 The motor (tray 1 pick) did not run at the correct
timing.
162.80 The motor (tray 2 pick) did not turn on.
162.81 The motor (tray 2 pick) did not turn o.
162.82 The motor (tray 2 pick) speed did not ramp up to
the required level.
162.83 The motor (tray 2 pick) stalled.
162.84 The motor (tray 2 pick) ran too slow.
162.85 The motor (tray 2 pick) ran too fast.
162.86 The motor (tray 2 pick) did not run at the correct
timing.
151 error messages
Error code Description Action
151.80 The motor (K developer) did not turn on. See
“Motor (K developer) service check” on
page 208.
151.81 The motor (K developer) did not turn o.
151.82 The motor (K developer) speed did not ramp up to
the required level.
151.83 The motor (K developer) stalled.
151.84 The motor (K developer) ran too slow.
150.85 The motor (K developer) ran too fast.
150.86 The motor (K developer) did not run at the correct
timing.
7528
Diagnostic information
189