Lexmark XC4150 - Page 188

149 error messages
Error code Description Action
149.80 The motor (output) did not turn on. See
“Motor (output) service check” on
page 206.
149.81 The motor (output) did not turn o.
149.82 The motor (output) speed did not ramp up to the
required level.
149.83 The motor (output) stalled.
149.84 The motor (output) ran too slow.
149.85 The motor (output) ran too fast.
149.86 The motor (output) did not run at the correct
timing.
150 and 160 error messages
Error code Description Action
150.80 The motor (duplex/MPF) did not turn on. See
“Motor (duplex/MPF) service check” on
page 207.
160.80 The motor (duplex/MPF) did not turn on.
150.81 The motor (duplex/MPF) did not turn o.
160.81 The motor (duplex/MPF) did not turn o.
150.82 The motor (duplex/MPF) speed did not ramp up to
the required level.
160.82 The motor (duplex/MPF) speed did not ramp up to
the required level.
150.83 The motor (duplex/MPF) stalled.
160.83 The motor (duplex/MPF) stalled.
150.84 The motor (duplex/MPF) ran too slow.
160.84 The motor (duplex/MPF) ran too slow.
150.85 The motor (duplex/MPF) ran too fast.
150.86 The motor (duplex/MPF) did not run at the correct
timing.
160.86 The motor (duplex/MPF) did not run at the correct
timing.
7528
Diagnostic information
188