LSIS SV-iS7 series - Page 13

Contents
xi
4.1.9
Control terminal line diagram
(Basic I/O terminal block below 22kW)
- - - - - - - - - - - - - - - 4-17
4.1.10 Control terminal line diagram
(Insulated I/O terminal block above 30kW)
- - - - - - - - - - - - - - - 4-21
4.1.11
Control circuit terminal
- - - - - - - - - - - - - - - 4-23
4.1.12 Specifications of signal terminal block
distribution
- - - - - - - - - - - - - - - 4-24
4.2 Operation Checking
- - - - - - - - - - - - - - - 4-26
4.2.1 Easy start
- - - - - - - - - - - - - - - 4-26
4.2.2 Easy start operation
- - - - - - - - - - - - - - - 4-26
4.2.3 Checking for normal working
- - - - - - - - - - - - - - - 4-27
Chapter 5 How To Use Keypad
5.1 How To Use Keypad
- - - - - - - - - - - - - - - 5-1
5.1.1 Standard KEYPAD appearance and
description (Graphic keypad)
- - - - - - - - - - - - - - - 5-1
5.1.2 Menu composition
- - - - - - - - - - - - - - - 5-6
5.1.3 Mode shift
- - - - - - - - - - - - - - - 5-9
5.1.4 Group shift
- - - - - - - - - - - - - - - 5-10
5.1.5 Code (Function item) shift
- - - - - - - - - - - - - - - 5-11
5.1.6 Parameter setting
- - - - - - - - - - - - - - - 5-12
5.1.7 Operating status monitoring
- - - - - - - - - - - - - - - 5-13
5.1.8 Failure status monitoring
- - - - - - - - - - - - - - - 5-15
5.1.9 How to initialize parameter
- - - - - - - - - - - - - - - 5-17
Chapter 6 Basic Functions
6.1 Basic Functions - - - - - - - - - - - - - - - 6-1
6.1.1 How to set frequency - - - - - - - - - - - - - - - 6-1
6.1.2 Analog command frequency fixation - - - - - - - - - - - - - - - 6-10
6.1.3 Changing frequency to revolution - - - - - - - - - - - - - - - 6-11