LSIS SV-iS7 series - Page 14

Contents
xii
6.1.4 Sequential frequency setting - - - - - - - - - - - - - - 6-11
6.1.5 Operating command setting method - - - - - - - - - - - - - - 6-12
6.1.6 Prevention of forward or reverse rotation:
Run Prevent
- - - - - - - - - - - - - 6-14
6.1.7 Run Immediately with power on: Power-on
Run
- - - - - - - - - - - - - - - 6-14
6.1.8 Setting of accelerating/decelerating time and
pattern
- - - - - - - - - - - - - - - 6-15
6.1.9 Motor output voltage adjustment - - - - - - - - - - - - - - - 6-19
Chapter 7 Checking and Troubleshooting
7.1
Checking and troubleshooting - - - - - - - - - - - - - - - 7-1
7.1.1
Protective functions - - - - - - - - - - - - - - - 7-1
7.1.2 Alarm functions - - - - - - - - - - - - - - - 7-4
7.1.3 Troubleshooting - - - - - - - - - - - - - - - 7-6
7.1.4 Replacement of cooling fan - - - - - - - - - - - - - - - 7-9
7.1.5 Daily and regular checkup list - - - - - - - - - - - - - - - 7-11
Chapter 8 Table of Functions
8.1 Table of Functions - - - - - - - - - - - - - - - 8-1
8.1.1 Parameter mode – DRV group (ÎDRV) - - - - - - - - - - - - - - - 8-1
8.1.2 Parameter mode – Basic function group
(ÎBAS)
- - - - - - - - - - - - - - - 8-3
8.1.3 Parameter mode – Extended function group
(PARÎADV)
- - - - - - - - - - - - - - - 8-6
8.1.4 Parameter mode – Control function group
(ÎCON)
- - - - - - - - - - - - - - - 8-11
8.1.5 Parameter mode – Input terminal block
function group (ÎIN)
- - - - - - - - - - - - - - - 8-16