Chapter 6 Positioning Monitoring Package
6-2
• The menu and function of the positioning monitoring package are as follows.
Items Functions Remark
Monitors the positioning of the axis or gives commands.
Checks and modifies the positioning parameter of each axis.
Checks and modifies the operation data of axis X.
Checks and modifies the operation data of axis Y.
Carried out positioning monitoring.
Stops positioning monitoring.
Permanently saves the changed parameter and operation data in
PLC.
WRT
function
Saves the changed parameter and operation data in XG5000 project.
• For details of each menu, refer to 6.2.
To Next Page
Loading...
Need help?
General
