Lucent Technologies FiberReach DDM-2000 User Manual

363-206-305
Page 4 of 12 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
DDM-2000 FiberReach Installation
363-206-310, DDM-2000 FiberReach Multiplexer Installation Manual , is available for
customers planning to install the equipment themselves. To acquire this manual, refer to
"How to Order Documents" in the
About This Document
tab.
Lucent Technologies recommends that ONLY designated Lucent Technologies cables be
used with DDM-2000 FiberReach. Failure to use these cables will void the product
warranty.
Safety Instructions
Product Safety Labels
These instructions involve lasers, lightwave optical cable and connectors, and precautions
when handling circuit packs to prevent damage from electrostatic discharge. The
appropriate user/service manual contains admonishments in the form of
DANGERS,
WARNINGS,
and
CAUTIONS
that must be followed at all times.
These admonishments have the following definitions:
■
DANGER
indicates the presence of a hazard that
will cause death or severe
personal injury if the hazard is not avoided.
■
WARNING
indicates the presence of a hazard that
can cause death or severe
personal injury if the hazard is not avoided.
■
CAUTION
indicates the presence of a hazard that
will or can cause minor personal
injury or property damage if the hazard is not avoided. The caution is also used for
property-damage-only accidents. This includes equipment damage, loss of
software, or service interruption.
The alert symbol appears throughout these products and the
appropriate user/service manual to alert the user to the presence
of important operating and maintenance (servicing) instructions for
the DDM-2000 FiberReach.
!

Lucent Technologies FiberReach DDM-2000 Specifications

General

Brand	Lucent Technologies
Model	FiberReach DDM-2000
Category	Multiplexer
Language	English