IXL-001
: Operation and Maintenance 363-206-305
Page 8 of 12 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
System Turnup/Circuit Order Tab (Contd)
NTP-017 Establish Initial HDSL Service
(Group Equipped But Not in Service)
NTP-018 Add New HDSL Service
(Group Already in Service)
NTP-019 Discontinue End-to-End HDSL Service
NTP-020 Establish Single-Homed FiberReach OC-3 Access
via DDM-2000 OC-12 Backbone Ring
NTP-021 Establish Single-Homed FiberReach OC-3 or OC-12 Access
via FT-2000 OC-48 Backbone Ring
NTP-022 Establish Dual-Homed FiberReach OC-3 or OC-12 Access
via FT-2000 OC-48 Backbone Ring
NTP-023 Establish Dual-Homed FiberReach OC-3 Access
via DDM-2000 OC-12 Backbone Ring
NTP-024 Add New DDM-2000 FiberReach OC-3 or OC-12 Node
To an OC-3 or OC-12 Ring
NTP-025 Establish Initial End-to-End DS3 Service
(Group Equipped But Not in Service)
NTP-026 Discontinue End-to-End DS3 Service
NTP-027 Unused
NTP-028 Unused
NTP-029 Unused
NTP-030 Establish FiberReach OC-3 Release 4 Linear Extension
via DDM-2000 OC-3 Release 15 Backbone Ring
NTP-031 Establish FiberReach OC-3 Release 4 Linear Extension
via DDM-2000 OC-12 Backbone Ring
NTP-032 Establish FiberReach OC-3 or OC-12 Release 4
Linear Extension via FT-2000 OC-48 Backbone Ring
NTP-033 Upgrade DDM-2000 OC-3 Ring Network With
FiberReach OC-3 Shelves to OC-12 Ring Network
In Service
NTP-034 Establish FiberReach OC-3 or OC-12 Release 4
Linear Extension via WaveStar TDM 2.5G OC-48 or
10G OC-192 Backbone RIng
Table A – Numerical List of TOP Procedure (Note)
To Next Page
Loading...