DLP-503
: Detailed Level Procedure 363-206-305
Page 2 of 2 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
Figure 2. FC/PC-Type Universal Buildout
Figure 3. SC-Type Universal Buildout
4.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
5. Depress locking tab on the buildout until locking tab is free from the locked
position, rotate the buildout counterclockwise to the stop position, and
separate the buildout block by pulling it toward you. Refer to the appropriate
figure in Step 3 for the specific buildout type.
6.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
To Next Page
Loading...