Lucent Technologies FiberReach DDM-2000 - Page 1541

363-206-305 Detailed Level Procedure:
DLP-512
Issue 3, June 2000 Page 7 of 10
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
Feature package ** STS3C, VT PM, or DS1 PM
set-feat
Action enabled, disabled disabled set-feat
NSAP structure
Organization ID (Operator ID) 6 hex digits 000000 ent-ulsdcc-l3
Reserved (Reserved) 4 hex digits 0000
ent-ulsdcc-l3
Routing Data (Domain) 4 hex digits 00000000 ent-ulsdcc-l3
Routing Data (Area) 4 hex digits 00000000
ent-ulsdcc-l3
Level 2 IS routing enable or disable disable ent-ulsdcc-l3
NSAP structure
TARP lifetime 1 to 65535 100
ent-ulsdcc-l4
NSAP system ID 12 hex digits none
ent-ulsdcc-l4
NSAP organization ID 6 hex digits see command pgs. ent-ulsdcc-l4
NSAP reserved field 4 hex digits see command pgs. ent-ulsdcc-l4
NSAP routing domain field 4 hex digits see command pgs.
ent-ulsdcc-l4
NSAP routing area field 4 hex digits see command pgs. ent-ulsdcc-l4
TARP timer T1 1 to 3600 secs. 15 secs.
ent-ulsdcc-l4
TARP timer T2 1 to 3600 secs. 25 secs. ent-ulsdcc-l4
TARP timer T3 1 to 3600 secs. 40 secs. ent-ulsdcc-l4
TARP timer T4 1 to 3600 secs. 20 secs. ent-ulsdcc-l4
TARP loop detection flush timer 1 to 1440 mins. 5 mins. ent-ulsdcc-l4
TARP data cache enable or disable enable
ent-ulsdcc-l4
NSAP system identifier 12 hex digits see command pgs. ent-ulsdcc-l4
TARP data cache ent-ulsdcc-l4
TARP system tid 20 characters see command pgs. ent-ulsdcc-l4
Target identifier 20 characters ent-ulsdcc-l4
TARP organization id 6 hex digits 000000
ent-ulsdcc-l4
TARP reserved 4 hex digits see command pgs. ent-ulsdcc-l4
TARP routing domain 4 hex digits see command pgs. ent-ulsdcc-l4
TARP area field 4 hex digits see command pgs. ent-ulsdcc-l4
OS type (ACID) see command pgs. ent-osacmap
ACID (OS type or funct.) see command pgs.
ent-tl1msgmap
TL1 message type see command pgs.
ent-tl1msgmap
Action to assoc. message
type to OS enabled, disabled enabled ent-tl1msgmap
Cross-connection type twoway, dc, locked twoway ent-crs-sts1
Ring ID for drop&continue m1, m2 see command pgs.
ent-crs-sts1
Cross-connection type twoway, dc, locked twoway
ent-crs-vt1
Ring ID for drop&continue m1, m2 see command pgs. ent-crs-vt1
See notes and footnotes at end of table.
Table A – DDM-2000 FiberReach Parameters Provisionable Via the CIT (Contd)
Parameter Range
Default
(Note 1) Command (Note 2)