363-206-305 Detailed Level Procedure:
DLP-514
Issue 3, June 2000 Page 5 of 22
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
NOTE:
This single-homed OC-3/OC-12 ring or linear extension to WaveStar
2.5G/10G node configuration requires that the Port Units 1 thru 16 on
the host WaveStar 2.5G/10G shelf connect to the MAIN-1 OLIU at the
FiberReach shelf from the WaveStar 2.5G/10G shelf. The MAIN-2 OLIU
at the FiberReach shelf on the OC-3/OC-12 ring or linear extension
connects to companion Port Units 1 thru 16 on the host WaveStar
2.5G/10G shelf.
NOTE:
A dual-homed OC-3/OC-12 ring to WaveStar 2.5G/10G node
configuration requires that the first FiberReach MAIN-1 OLIU connect to
Port Units 1 thru 16 on host WaveStar 2.5G/10G shelf. Intermediate
FiberReach shelves on the same OC-3/OC-12 ring connect from MAIN-2
OLIU at one FiberReach shelf to the MAIN-1 OLIU at an adjacent
FiberReach shelf (node). The last FiberReach MAIN-2 OLIU connects to
any Port Units 1 thru 16 on the other host WaveStar 2.5G/10G shelf.
At each end of the span, connect the optical fiber transmit cables to the OLIU
OUT connections.
8. At each end of the span, measure the optical power of the optical fiber receive
cables using an optical power meter.
9. Replace the LBO assemblies (if required) with the correct buildout assemblies
per Figures 1, 2, 3, 4, 5, and 6 and Tables B, C, D, E, F, G, H, I, J, K, L, and/or
M [DLP-503].
Reconnect the optical fiber transmit cables at both ends.
To Next Page
Loading...