Lucent Technologies FiberReach DDM-2000 - Page 1600

DLP-520
: Detailed Level Procedure 363-206-305
Page 2 of 2 Issue 3, June 2000
DDM-2000 F
IBER
R
EACH
W
IDEBAND
S
HELF
!
CAUTION:
When a
DS1/DS1PM
is switched to protection, removal of any other
DS1/DS1PM
circuit pack or
177A
Retainer Card in the same group will
result in a loss of service to the protected
DS1/DS1PM
and the removed
DS1/DS1PM
circuit pack.
Use set-t1 command to set
DS1
/
DS1PM
port options.
4.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.
5. Set option switches and install new
DS1
/
DS1PM
circuit pack.
Reference:
DLP-508
6.
STOP. YOU HAVE COMPLETED THIS PROCEDURE.